IGET Bar Plus Refill: What Actually Refills, and What Does Not

Searches for an IGET Bar Plus refill usually mean one of two very different things, and the answer depends entirely on which device is in your hand. The IGET Bar Plus S3 is a pod system, so it takes replaceable pods rather than a bottle of e-liquid. The plain IGET Bar Plus 6000 is a disposable and takes neither. Getting that distinction wrong is how people end up trying to prise open a sealed unit with a knife, so this guide sorts out which is which, explains how pods actually work, and then walks through the faults that make a Bar Plus stop working. IGET Vapes Australia Store sells to adults aged 18 and over only.

Which Bar Plus do you have

The name covers two different classes of product, which is the root of most of the confusion.

The IGET Bar Plus S3 is a kit. It has a 950mAh rechargeable battery, charges over USB Type C, and the liquid lives in a separate pod that clips into the top. When the pod is finished, you take it off and clip on a new one, and the battery keeps going. This is the device people mean when they ask about refills.

The IGET Bar Plus 6000 is a disposable rated at 6,000 puffs. There is no pod to remove and nothing to refill. When it is finished, it is finished, the same as the IGET Bar 3500.

If the top section of your device lifts off, you have an S3. If the whole thing is one sealed piece, you have the 6000. You can also check what you bought against the S3 kits and pods and the Bar Plus 6000 range.

How the S3 pod system works

A pod is a sealed plastic cartridge holding both the e-liquid and the coil that vaporises it. That second part matters more than people expect. When you change a pod you are not just topping up liquid, you are fitting a brand new coil at the same time.

This is why an S3 tastes fresh again after a pod change while a disposable simply degrades until it dies. On a disposable the coil ages through the whole life of the device, gradually picking up residue and losing flavour. On a pod system the coil is replaced on the same schedule as the liquid, so the device never spends time running a tired coil.

It also means the battery is the only part you keep, and a 950mAh cell treated reasonably will outlast a great many pods. Treat the battery as the thing you own and the pods as the consumable.

Why you should not refill a pod with e-liquid

People do try, and it is worth explaining why it goes badly rather than simply saying no.

A pod is sealed at the factory. Getting liquid into one means puncturing it, and the hole then has to be closed well enough to hold a vacuum, because the airflow system depends on pressure balance. A pod that leaks does not just make a mess, it floods the airflow path and pulls liquid into your mouth.

The coil inside is also matched to a specific liquid at a specific nicotine strength. Fill it with something thinner and it floods and spits. Fill it with something thicker and the wick starves and burns, giving you the harsh taste covered in the burnt taste guide. Neither failure is repairable, so a refilled pod usually ends up in the bin faster than a fresh one would have.

There is a separate point worth making plainly. Australian rules around nicotine e-liquid are strict, and this store does not sell bottled e-liquid at all. If a page tells you to top up a sealed pod with loose nicotine liquid, be sceptical of the rest of what it tells you too.

Swapping a pod, step by step

1. Hold the battery section and pull the pod straight up. It is a friction fit, so pull rather than twist, and it should release with a firm tug.
2. Look at the two contacts on the battery where the pod sat. If there is condensation or liquid on them, wipe them dry with a tissue. Dirty contacts are the single most common cause of an S3 that suddenly stops firing.
3. Take the new pod out of its packaging and remove any protective plug or sticker from the base.
4. Press it straight down until it seats. There is a small click.
5. Wait a couple of minutes before the first draw. The wick needs time to saturate, and drawing on a dry wick is exactly how you burn a brand new pod on its first puff.
6. Start with a gentle draw rather than a hard one.

When a Bar Plus stops working

Most faults on an S3 come down to four things, and none of them require opening anything.

Nothing happens at all. Check the battery first by plugging it in and looking for a charging light. If it charges, the problem is the connection to the pod. Remove the pod, dry the contacts, refit it firmly.

It fires but produces almost no vapour. Usually a pod that has run dry, and the giveaway is a burnt or sharp taste alongside the weak draw. Occasionally it is a pod that never seated properly, so refit it before replacing it.

It blinks when you draw. If it blinks after a long draw, that is the safety cut off and is normal, so take shorter draws. If it blinks on every draw, charge it. The S3 is rechargeable over Type C, and the process is the same as charging an IGET Bar Pro, including the warning about fast chargers.

Liquid in your mouth. The pod has flooded, usually from being carried in a hot car or drawn on far too hard. Remove the pod, tap it gently mouthpiece down onto a tissue, dry the contacts and refit. Our guide on storing vapes covers the heat problem, which is a real one in an Australian summer.

If a device fails in a way none of this explains, and especially if it charges erratically or the build feels wrong, consider whether it is genuine. How to spot a fake IGET covers the checks. Anything genuinely faulty is covered by your rights under the Australian Consumer Law, and the ACCC sets out those guarantees in full. Our returns page explains how to raise it with us.

What pods do to the running cost

The reason to bother with a pod system is money and waste, not novelty. With a disposable you buy a battery, a coil and a housing every single time, and you throw all three away. With the S3 you buy the battery once and then buy only liquid and coil.

Over a few weeks that gap compounds, and it is the main argument for moving off disposables if you vape daily. We ran the arithmetic over six months in disposable vape versus pod kit cost. The environmental side is not trivial either: every disposable contains a lithium cell that must never go in a household bin, which the disposal guide covers.

Live pricing for kits and pods is on the S3 range, and the full IGET range shows everything else in stock.

Questions people ask

Can you refill an IGET Bar Plus with e-liquid?

No. The S3 takes sealed replaceable pods, not bottled liquid, and the Bar Plus 6000 is a disposable that cannot be opened at all. Puncturing a pod to fill it breaks the pressure seal and causes leaking and burning.

What is the difference between the Bar Plus S3 and the Bar Plus 6000?

The S3 is a rechargeable kit with a 950mAh battery and replaceable pods. The Bar Plus 6000 is a sealed disposable rated at 6,000 puffs with nothing to replace or recharge.

How do I know when to change the pod?

Flavour fades and the vapour thins, usually with a sharp or burnt edge. Because the coil lives inside the pod, changing it restores both the liquid and a fresh coil, so the device tastes new again.

My IGET Bar Plus S3 stopped working after a pod change. What happened?

Almost always liquid or condensation on the battery contacts. Remove the pod, wipe both contacts dry with a tissue, and refit the pod firmly until it clicks.

Why does a new pod taste burnt on the first puff?

The wick had not saturated yet. Leave a fresh pod to sit for a couple of minutes after fitting, then start with a gentle draw rather than a hard one.

Is the IGET Bar Plus S3 rechargeable?

Yes, over USB Type C, with a 950mAh battery. Avoid fast chargers rated 18W or above, since the heat permanently reduces the capacity of a cell this size.